ARESCOM, INC

APEX 1100 (VER. 3.2.1)

Card Type                  ISDN BRI Access Router
Chip Set                   Unidentified
Wiring Type                Unshielded twisted pair
I/O Options                Power, 10 BaseT Ethernet interface via RJ-45
                           connector,

                           RJ-11 telephone line (2) Ethernet interface via
                           BNC connector,

                           9-pin console port, ISDN BRI U interface via
                           RJ-45 connector,
Ethernet Transfer Rate     10Mbps
ISDN Data Rate             128Kbps
ISDN Modulation Protocol   PPP, MLPPP
Line Coding                2B1Q
Data Bus                   External

[Image]

                                CONNECTIONS

         Function            Label            Function            Label

  DC power connector          CN1      ISDN BRI U interface        CN5
                                       (RJ-45)

  9-pin DTE port              CN2      Telephone line 1            CN6
                                       (RJ-11) (Optional)

  Ethernet interface          CN3      Telephone line 2            CN7
  (BNC)                                (RJ-11) (Optional)

  10 BaseT Ethernet           CN4
  interface (RJ-45)

                             DIAGNOSTIC LED(S)

   LED      Color         Status                   Condition

   PWR          Green       On                    Power is on

   PWR          Green      Off                   Power is off

   DGN          Green    Blinking       Power-up reboot is in progress
                          (fast)

   DGN          Green    Blinking           Line connection has been
                          (slow)                  established

   DGN          Green      Off        Connection is broken or SPID number
                                              registration failed

  ACT1          Yellow   Blinking      Data is being transmitted/recieved
                                             on Ethernet interface

  ACT1          Yellow     Off                 Data is not being
                                        transmitted/recieved on Ethernet
                                                   interface

   LN1          Green       On            10 BaseT connection is good

   LN1          Green      Off           10 BaseT connection is broken

  ACT2          Yellow   Blinking      Data is being transmitted/recieved
                                               on ISDN interface

  ACT2          Yellow     Off                 Data is not being
                                          transmitted/recieved on ISDN
                                                   interface

   LN2          Green    Blinking     ISDN connection is broken or a loss
                          (fast)      of synchronization condition exists

   LN2          Green    Blinking           ISDN connection is good
                          (slow)

   P1           Yellow      On           Telephone line 1 is off-hook

   P1           Yellow     Off            Telephone line 1 is on-hook

   P2           Yellow      On           Telephone line 2 is off-hook

   P2           Yellow     Off            Telephone line 2 is on-hook